Free cookie consent management tool by TermsFeed
Infographic detailing the Australian Heavy Vehicle National Law (HVNL) 2026 Reforms effective August 1, 2026, and the NSW Zero-Emission Vehicle (ZEV) Exemption, highlighting updates to mass limits, trailer lengths, ADR compliance alerts, and ZEV axle mass limits.

Australian HVNL 2026 Reforms & NSW ZEV Exemption

Australian HVNL 2026 Reforms & NSW ZEV Exemption 1024 576 TruckScience

The Australian Heavy Vehicle National Law (HVNL) reforms – coming into effect on 1 August 2026 via the Heavy Vehicle National Law Amendment Regulation 2026 represent one of the most significant updates to Australian heavy vehicle transport regulations in over a decade.

TruckScience’s AU: National regulation set has been fully updated to reflect these amendments. Both new and existing TruckScience calculations will automatically be checked against the updated rules going forward, while it is still possible to toggle to the old rules to examine the implications of the changes.

Key National HVNL Reform Updates

1. General Mass Limits (GML) & Removal of CML
  • Mass Limits: Concessional Mass Limits (CML) have been removed, with default axle group weight limits under GML automatically adjusted upward to reflect the aligned limits.
  • Automated Mass Cap Calculations: Mass cap increases (1 tonne or 2 tonnes, depending on total vehicle mass) are calculated dynamically in the background for smaller B-Double combinations.
  • HML Adjustments: Impacts to Higher Mass Limits (HML) and gross weight limits have been incorporated across all relevant vehicle categories.
2. Increased Vehicle & Trailer Lengths
  • Prescribed semitrailers: For semi-trailers classified as “prescribed trailers,” longer permissible dimensions are now supported, including:
    • Trailer Wheelbase up to 10.5m.
    • Point of Articulation to the rear of the trailer up to 14.5m.
    • Increased maximum allowable rear overhang.
  • 20m General Access Combinations: The general access vehicle length limit increases from 19m to 20m when all qualifying conditions are met.
3. Built-In ADR Compliance Alerts

To save you from cross-referencing complex rulebooks, the TruckScience Notes panel now automatically prompts you when specific Australian Design Rules apply:

  • ADR 38/05 (Trailer Braking Systems): Flagged for combinations exceeding 19m in length.
  • ADR 106/00 (Side Underrun Protection): Flagged based on your specific kingpin-to-rear-overhang line dimensions.

Compare Old vs. New Laws with Regulation Toggling

To help you measure the exact impact of these regulatory changes on your payload capacity and axle distribution, we have preserved the previous regulatory framework under a regulation set named, ‘AU: National – Pre Reform (July 2026)’.

Within the Axle Weight Calculator, you can instantly toggle between the pre-reform and post-reform regulations to see payload gains and compliance differences on the exact same build.

NSW Zero Emission Vehicle Mass & Dimension Exemption

In addition to national reforms, we have also implemented the New South Wales Class 3 Zero Emission Vehicle Mass and Dimension Exemption Notice 2026 (C2026G00349), which remains in effect through 26 May 2031.

This notice allows qualifying battery-electric and hydrogen fuel cell vehicles to exceed standard mass and axle spacing limits to accommodate zero-emission technology.

  • Eligible Configurations: Rigid trucks or prime movers operating with or without a semitrailer, or as a B-double.
  • Substantial Mass Concessions:
    • Front steer axle permissible mass up to 8,000 kg.
    • Rear axle group permissible mass up to 18,500 kg.
    • Trailer axles remain governed by standard limits, but eligible vehicles receive exemption from regular vehicle mass and axle spacing limits.
  • Automated Condition Checks & Warnings: The Notice requires specific conditions to unlock these higher limits, including minimum required spacings between individual axles and axle groups. TruckScience monitors these parameters in real time and displays warning notifications if your vehicle configuration fails to meet the spacing conditions.

Try the Updates Today

Log into your TruckScience Axle Weight Calculator account to start using the updated Australian and NSW ZEV regulations immediately. If you have any questions about how these changes affect your vehicle configurations, pop open a Chat to contact our Support team anytime.

Watch a 2-minute intro to TruckScience

Try TruckScience

Try TruckScience for free!

Try TruckScience for free!